- (61) 3 9761 7600
- sales@andcorp.com.au
The genuine US Conec IBC™ Brand Cleaner MPO II provides more than 525 cleaning engagements for MPO and MTP® connectors. Its antistatic, non-fraying cleaning system supports both unmated connector and behind-the-panel adaptor cleaning. US Conec part number 7104.
The US Conec IBC MPO Cleaner provides a simple, repeatable way to clean MPO and MTP® multifibre connector end faces. Designed by US Conec for MT ferrule interfaces, the IBC™ Brand Cleaner MPO II supports both unmated connector cleaning and behind-the-panel cleaning through an MPO adaptor. Therefore, technicians can use one compact cleaning tool across manufacturing, installation, commissioning and maintenance environments.
Contamination remains one of the most common causes of optical connection problems. However, multifibre connectors require particular care because one ferrule carries several fibres within a compact contact area. A single contaminant can affect one fibre, several fibres or the physical contact between two ferrules.
The US Conec IBC™ Brand Cleaner MPO II uses an antistatic, non-fraying cleaning material to clean the connector end face. Moreover, its push-style operation advances the cleaning material for each engagement. As a result, technicians can complete routine dry cleaning without carrying a separate cleaning cassette into every location.
US Conec specifies more than 525 cleaning engagements per unit. Consequently, the cleaner offers practical capacity for data centres, telecommunications facilities, cable assembly operations, test laboratories and field service teams.
Anderson Corporation supplies the genuine US Conec IBC™ Brand Cleaner MPO II for customers who require a recognised manufacturer, defined product identity and compatibility with MPO and MTP® connector systems.
US Conec developed the IBC™ range to provide purpose-designed cleaning tools for fibre optic connector interfaces. Within that range, the IBC™ Brand Cleaner MPO II targets the rectangular MT ferrule used by MPO and MTP® connectors.
The cleaner carries US Conec part number 7104. Therefore, customers can identify the exact product rather than relying only on a general description such as “MPO cleaner”.
Clear product identification becomes especially important when organisations maintain approved equipment lists. For example, a data centre operator may nominate a particular cleaner in its work instructions. Similarly, a cable assembly manufacturer may record the cleaner’s part number within a production process. A contractor may also need to demonstrate that technicians used the nominated product during commissioning.
The IBC™ MPO II provides several manufacturer-defined features:
Together, these features make the cleaner suitable for controlled production environments and practical field maintenance.
| Attribute | Specification |
|---|---|
| Product | IBC™ Brand Cleaner MPO II |
| Manufacturer | US Conec |
| Manufacturer part number | 7104 |
| Connector type | MPO and MTP® |
| Ferrule type | MT |
| Cleaner style | Push-style port cleaner |
| Cleaning function | Unmated and behind-the-panel connector cleaning |
| Cleaning capacity | More than 525 engagements |
| Cleaning material | Non-fraying cloth |
| Static control | Antistatic cleaning system |
| Use type | Disposable |
| Suitable environments | Manufacturing, installation, commissioning and maintenance |
The specification table provides a concise product summary. Nevertheless, users should always confirm that the cleaner suits the exact connector interface and maintenance procedure used within their network.
MPO, MTP® and MT often appear together in product descriptions. However, the three terms do not mean exactly the same thing.
MPO means multifibre push-on. It describes an internationally standardised multifibre connector interface. MPO connectors use a rectangular ferrule that can accommodate several optical fibres in one connection.
MTP® refers to a registered US Conec connector brand. An MTP® connector belongs to the broader MPO connector family, although US Conec incorporates proprietary design features within its MTP® products.
MT refers to the mechanical-transfer ferrule used within the connector. The ferrule aligns multiple fibres across the mating interface. Consequently, an MPO cleaning tool must clean the wider MT ferrule geometry rather than the small circular ferrule found in an LC, SC or FC connector.
The US Conec IBC™ Brand Cleaner MPO II targets this MT ferrule interface. Therefore, it should not be treated as a general-purpose cleaner for LC, SC, FC or ST connectors.
This distinction also supports the SEO separation between Anderson Corporation’s two cleaner pages. The RapidConnect product page answers broad searches for an MTP/MPO one-click cleaning tool. In contrast, this Authority Hub serves customers specifically searching for a genuine US Conec IBC™ cleaner.
Every fibre optic connection depends on clean, correctly aligned optical surfaces. Nevertheless, the risk becomes more complex when several fibres share one ferrule.
An MPO or MTP® connector may carry multiple transmission channels. Therefore, contamination does not necessarily create one obvious failure. Instead, it may cause different levels of loss across individual fibres.
For example, a contaminant could interfere with one fibre while neighbouring fibres continue to perform normally. Alternatively, debris may affect the physical contact between the ferrules and influence several channels. As a result, technicians may encounter inconsistent test results rather than a complete link failure.
Common contaminants include:
Even a new connector can carry contamination. For that reason, technicians should not assume that a protective cap guarantees a clean end face. Caps protect against physical exposure, but they do not provide cleanliness certification.
Furthermore, mating a contaminated connector can transfer debris to the opposing ferrule. The contamination may then affect both components. In some cases, hard debris can also damage an optical surface when the connectors mate under pressure.
A disciplined inspect-clean-inspect process helps control these risks. The cleaner forms one part of that process; however, it does not replace suitable inspection equipment, training or documented procedures.
Static charge can attract fine airborne contaminants to a connector surface. Therefore, cleaning performance involves more than moving visible debris away from the fibre region.
US Conec equips the IBC™ Brand Cleaner MPO II with an antistatic cleaning system. This feature helps minimise contaminant attraction after cleaning. Consequently, the tool supports controlled end-face maintenance in environments where small particles can quickly return to a cleaned interface.
Static control becomes particularly useful in data centres, laboratories and cable assembly facilities. These environments may appear clean, yet fine particles still circulate through airflow, packaging activity and routine equipment handling.
The antistatic system does not make the connector immune to later contamination. Therefore, technicians should still minimise the time between cleaning, inspection and mating. They should also reinstall suitable protective caps whenever a connector remains disconnected.
Nevertheless, the antistatic feature differentiates the genuine US Conec product from a basic mechanical wiping device. It forms part of a broader design intended to produce consistent connector cleaning.
The cleaning material directly contacts the ferrule surface. Therefore, its construction has a significant effect on the cleaning process.
US Conec specifies a non-fraying cloth design for the IBC™ Brand Cleaner MPO II. Consequently, the material can clean the ferrule without intentionally leaving loose textile fibres behind.
This feature matters because an unsuitable cloth may solve one contamination problem while creating another. For example, a material that sheds fibres can deposit new debris across the connector surface. Technicians may then need to repeat the cleaning cycle.
The cleaner contains its cleaning material inside the housing. As a result, users do not need to handle the cloth directly during normal operation. This enclosed format also reduces unnecessary exposure to hands, benches, toolboxes and other potential sources of contamination.
Each push advances the internal material. Therefore, the tool presents a new cleaning section for the next engagement. This mechanism supports repeatable use while reducing direct contact with the cleaning media.
US Conec rates the IBC™ Brand Cleaner MPO II for more than 525 cleaning engagements. Therefore, one unit can support a substantial number of routine cleaning operations.
The engagement rating provides a more meaningful measure than a general statement such as “long-lasting”. It allows procurement teams and supervisors to estimate stock requirements based on their expected workload.
However, one engagement does not always equal one completed connector. A contaminated end face may require more than one cleaning cycle. In addition, the technician should inspect the connector again after cleaning. If contamination remains, the procedure may require another appropriate cleaning step.
Actual consumption will consequently depend on:
Facilities should replace the unit when it reaches the end of its cleaning media. Furthermore, technicians should not attempt to dismantle, refill or modify a disposable cleaner unless the manufacturer specifically authorises that process.
The IBC™ Brand Cleaner MPO II uses a straightforward push action. This movement engages the internal cleaning mechanism and moves the cleaning material across the ferrule interface.
For an unmated cable assembly, the technician uses the tool’s connector-cleaning configuration. Meanwhile, the adaptor configuration allows access to a connector installed behind a compatible panel adaptor.
This dual-use approach reduces the need to carry separate cleaners for exposed connectors and installed ports. Consequently, technicians can maintain patch leads, trunk assemblies, cassette connections and panel interfaces with one suitable product.
The push action also assists procedural consistency. Instead of manually judging cloth movement, the technician activates the cleaner through its designed engagement. Nevertheless, the user must still align and handle the tool correctly.
A simple mechanism should never encourage careless cleaning. Therefore, organisations should incorporate the cleaner into a formal method that covers inspection, tool selection, connector handling and acceptance criteria.
An unmated connector refers to the exposed connector at the end of a patch lead, trunk cable or other cable assembly. Because the connector remains accessible, the technician can inspect and clean it directly.
A suitable workflow generally includes the following steps:
This sequence reinforces an important principle: cleaning should respond to inspection findings. Blind cleaning may remove contamination, but it does not confirm the final condition.
Furthermore, a technician should never touch the ferrule or fibre region to check whether it appears clean. Oils from skin can contaminate the surface immediately.
Many MPO and MTP® connections sit behind patch panels, modules or cassettes. Therefore, technicians cannot always remove the internal connector for direct cleaning.
The US Conec IBC™ Brand Cleaner MPO II supports behind-the-panel cleaning through a compatible adaptor. Its adaptor-cleaning configuration reaches the installed connector without requiring the technician to dismantle the panel assembly.
This capability offers several practical benefits:
However, the technician must identify the correct port before inserting the cleaner. Dense fibre panels may contain many similar interfaces, so clear labelling remains essential.
Additionally, the cleaner should enter the adaptor in the correct orientation. Excessive force can damage the cleaner, connector or adaptor. Therefore, users should stop if the tool does not engage normally and verify compatibility before continuing.
A cleaner can remove contamination, but it cannot tell the technician whether the connector meets the required acceptance criteria. Inspection therefore remains essential.
A robust workflow follows three basic stages:
First, inspect the connector end face with equipment designed for MPO or MTP® interfaces. The inspection system should display the relevant fibre array and surrounding ferrule area.
This initial inspection establishes whether contamination exists. Moreover, it can reveal conditions that cleaning alone may not correct, such as physical damage.
Next, use the US Conec IBC™ Brand Cleaner MPO II according to its instructions. Keep the cleaner and connector aligned, then complete the push engagement without unnecessary movement.
One cleaning cycle may remove light contamination. However, heavier or more persistent material may require another step under the organisation’s approved procedure.
Finally, inspect the connector after cleaning. This second inspection confirms whether the process achieved an acceptable result.
If the end face remains contaminated, repeat the appropriate procedure. Conversely, if inspection reveals scratches, chips or other damage, further dry cleaning may not solve the problem.
The inspect-clean-inspect method also creates accountability. When organisations document results, supervisors can distinguish contamination-related faults from damaged components, test equipment problems and wider network issues.
IEC 61300-3-35 establishes inspection and measurement requirements for fibre optic connector end faces. The standard supports objective assessment by defining inspection zones and acceptance criteria.
US Conec lists IEC 61300-3-35 within the applications information for the IBC™ Brand Cleaner MPO II. However, the cleaner alone does not establish compliance. Instead, compliance depends on the complete inspection and acceptance process.
A standards-based workflow generally requires:
Therefore, organisations should avoid claiming that a connector complies merely because a technician used a particular cleaner. The technician must inspect and assess the end face under the applicable procedure.
Nevertheless, a purpose-designed cleaning tool supports that workflow by helping remove contaminants before final inspection and mating.
The US Conec IBC MPO Cleaner suits environments that use MPO or MTP® multifibre connectivity.
Modern data centres often use multifibre connectivity within structured cabling, high-density patching and parallel-optic links. Consequently, technicians may need to maintain many MPO or MTP® interfaces across panels, cassettes and equipment connections.
The cleaner’s compact format supports work in dense cabinets. Furthermore, behind-the-panel cleaning allows technicians to reach installed connectors through compatible adaptors.
Telecommunications facilities use multifibre assemblies where space, installation speed and connection density matter. Clean connector end faces support reliable commissioning and maintenance.
Because the cleaner handles unmated and installed interfaces, field teams can use it during installation, testing and restoration work.
Manufacturers need repeatable processes when terminating, assembling and testing multifibre products. Therefore, a cleaner with a defined manufacturer part number can fit into controlled work instructions.
The non-fraying cloth and antistatic system also support production environments where technicians repeatedly prepare connectors for inspection and testing.
Laboratories connect and disconnect reference assemblies frequently. As a result, contamination can transfer between test leads, devices and components.
The IBC™ MPO II provides a practical cleaning method between test activities. However, laboratories should still protect reference-grade interfaces and inspect them under their documented procedures.
Commissioning teams must distinguish installation faults from dirty connectors. Therefore, connector inspection and cleaning should occur before technicians draw conclusions from unexpected loss results.
A suitable cleaner can help remove contamination as a possible cause. Nevertheless, technicians should record the final inspection and retest the link after cleaning.
Maintenance teams often work under time pressure. Even so, they should not bypass inspection or use improvised materials.
The compact push-style cleaner provides a purpose-designed option for service kits. Moreover, its 525+ engagement capacity reduces the need for frequent replacement under normal use.
MPO and MTP® connectors support high connection density because one interface carries several fibres. However, that density increases the importance of disciplined maintenance.
A technician working on an LC connection deals with one fibre per connector. By contrast, a single multifibre connector can influence several optical paths at once. Therefore, contamination can have a broader operational effect.
High-density panels also create handling challenges. Limited access may make it harder to see labels, align tools and avoid disturbing adjacent connections. Consequently, teams should plan cleaning access when they design the panel layout.
Useful practices include:
The IBC™ MPO II supports these practices, but sound network management still determines the overall result.
A fibre optic connection contains two mating surfaces. Therefore, cleaning only one side may leave contamination on the opposing connector.
Worse still, mating a clean connector with a contaminated connector can transfer debris. Consequently, both sides may become dirty.
Technicians should inspect both interfaces wherever the equipment and work procedure allow. For example, they may need to inspect and clean the exposed patch lead connector as well as the connector installed behind the adaptor.
This approach takes more time than cleaning only the most accessible side. Nevertheless, it reduces repeated fault finding and helps protect cleaned components from immediate recontamination.
Test leads also require attention. A contaminated reference lead can transfer debris to multiple network ports. Therefore, teams should treat test equipment interfaces as part of the same contamination-control system.
The US Conec IBC™ Brand Cleaner MPO II provides a dry cleaning method. Dry cleaning offers several advantages because it remains compact, convenient and easy to integrate into field work.
For light dust and many common contaminants, a dry cleaning cycle may provide the required result. However, not every contaminant responds identically.
Persistent residue may require an alternative method under an approved procedure. In such cases, technicians should use only suitable fibre optic cleaning materials and methods. Household solvents, tissues, clothing and general-purpose wipes can introduce residue, fibres or damage.
After any alternative cleaning process, the connector should receive another inspection. Moreover, the user should confirm that no liquid remains before mating the interface.
The correct response depends on the inspection result. Therefore, organisations should train staff to distinguish removable contamination from physical end-face damage.
A connector cleaner can only support good results if users keep it in suitable condition. Therefore, technicians should protect the IBC™ MPO II from dirt, moisture and physical damage.
Recommended handling practices include:
Technicians should also avoid sharing a contaminated tool between uncontrolled work areas. For example, a cleaner used in a dusty construction environment may need different storage controls from one assigned to a laboratory.
Even a well-designed cleaner cannot compensate for poor handling. Therefore, technicians should recognise the most common mistakes.
Packaging and protective caps reduce exposure, but they do not prove cleanliness. Always inspect new connectors before mating them.
The push action confirms that the mechanism operated. However, it does not confirm that the connector passed inspection.
Contamination on the opposite connector can immediately transfer back to the cleaned surface. Therefore, inspect both sides.
Skin oils can contaminate the end face. Consequently, technicians should handle the connector body rather than the ferrule.
An LC or SC cleaner cannot properly clean an MPO ferrule. Similarly, users should confirm compatibility before inserting any cleaner into a port.
Resistance may indicate incorrect alignment, orientation or compatibility. Stop and check instead of applying more force.
An open port can collect dust quickly. Therefore, reconnect it promptly or install a clean protective cap.
Cleaning can address contamination. However, it cannot repair scratched fibres, damaged ferrules, broken latches or defective cable assemblies.
Some customers select a cleaner according to connector type and operating cost. Others must also comply with an approved product list, manufacturer preference or controlled maintenance instruction.
The US Conec IBC MPO Cleaner particularly suits customers who require:
Clear identification reduces substitution risk. Therefore, purchase orders should include the manufacturer, product name and part number rather than only requesting an “MPO pen cleaner”.
A suitable ordering description would be:
US Conec IBC™ Brand Cleaner MPO II, part number 7104, for MPO and MTP® connector interfaces.
Anderson Corporation supplies both a genuine US Conec cleaner and a RapidConnect alternative. Although both products clean MTP/MPO connector interfaces, they serve different purchasing preferences.
| Requirement | US Conec IBC™ MPO II | RapidConnect MTP/MPO Cleaner |
|---|---|---|
| Primary positioning | Genuine manufacturer-branded cleaner | Practical general-purpose cleaner |
| Manufacturer or brand | US Conec IBC™ | RapidConnect |
| Product identity | IBC™ Brand Cleaner MPO II | MTP/MPO One-Click Cleaner |
| Ordering reference | US Conec part number 7104 | SOCC-MTP/MPO |
| Cleaning capacity | 525+ engagements | 600+ engagements |
| Antistatic system | Manufacturer-specified feature | Refer to RapidConnect product specifications |
| Non-fraying cloth | Manufacturer-specified feature | Refer to RapidConnect product specifications |
| Best suited to | US Conec specifications and approved product lists | General routine MTP/MPO cleaning requirements |
The number of engagements should not determine the decision by itself. Instead, buyers should consider the project specification, manufacturer preference, cleaning system, procurement controls and total maintenance procedure.
Customers seeking a practical cleaner for general multifibre maintenance can review the RapidConnect MTP/MPO One-Click Cleaner. Meanwhile, the US Conec IBC™ MPO II suits projects that specifically require or prefer the genuine US Conec product.
This deliberate distinction prevents the two products from competing for exactly the same purpose within Anderson Corporation’s range.
A genuine branded cleaner provides more than a familiar product name. It gives the purchaser an identifiable manufacturer, product family and part number.
This traceability can support:
Moreover, some organisations already use MTP® connectivity from US Conec. In those environments, selecting an IBC™ cleaner may align with an established manufacturer ecosystem.
The cleaner’s antistatic system, non-fraying cloth and behind-the-panel capability also provide clear functional reasons for selection. Therefore, the product should not rely solely on brand recognition.
Anderson Corporation identifies the product as the genuine US Conec IBC™ Brand Cleaner MPO II. Accordingly, the page avoids rebranding it as RapidConnect or presenting it as a generic cleaner.
Customers can also review the official US Conec IBC™ Brand Cleaner MPO II specifications.
The IBC™ MPO II uses a disposable housing. Therefore, organisations should estimate consumption and maintain suitable replacement stock of the US Conec IBC MPO Cleaner.
The 525+ engagement capacity helps reduce replacement frequency. Nevertheless, cleaners can run out unexpectedly if teams do not monitor usage.
For critical sites, consider keeping:
Organisations should dispose of exhausted cleaners according to their workplace and local waste procedures. Furthermore, users should not dismantle the unit to access the internal material.
Good connector handling can also reduce unnecessary cleaning cycles. For example, promptly replacing caps and avoiding contact with the ferrule helps preserve cleanliness. Consequently, careful practice can reduce both cleaner consumption and network risk.
The US Conec IBC MPO Cleaner is a push-style cleaning tool for MPO and MTP® multifibre connector interfaces. The IBC™ Brand Cleaner MPO II uses an antistatic system and non-fraying cleaning material.
The manufacturer part number for the IBC™ Brand Cleaner MPO II covered by this page is 7104.
US Conec specifies more than 525 cleaning engagements per unit.
Yes. MTP® belongs to the MPO connector family, while US Conec owns the MTP® brand. The cleaner targets the MT ferrule interface used by these connectors.
Yes. The cleaner can clean an exposed connector on a cable assembly.
Yes. The cleaner supports behind-the-panel cleaning through a compatible MPO adaptor.
Yes. US Conec specifies an antistatic cleaning system that helps minimise contaminant attraction after cleaning.
The internal cleaning material resists shedding loose fibres during normal cleaning. Therefore, it reduces the risk of introducing textile debris to the ferrule.
No. US Conec identifies the IBC™ Brand Cleaner MPO II as a disposable cleaner.
No. One push completes a cleaning engagement, but inspection must confirm the outcome. Persistent contamination may require another approved cleaning step.
Yes. Inspection establishes the initial condition and may reveal physical damage. After cleaning, inspect the connector again.
No. The cleaner removes contamination, while inspection equipment assesses the connector end face. A complete workflow requires both functions.
No. This cleaner targets MPO and MTP® interfaces. Use a cleaner designed for the relevant LC, SC or other connector type.
The cleaning action concerns the physical MT ferrule interface rather than the optical transmission category. However, always confirm the specific connector format and procedure before use.
No. Cleaning may remove debris, oils and other contamination. However, it cannot repair scratches, chips or other physical damage.
Both sides should receive inspection. If either side fails the required cleanliness criteria, clean it using the appropriate method before mating.
No. Anderson Corporation supplies the products separately. This page covers the genuine US Conec IBC™ Brand Cleaner MPO II, while the RapidConnect product has its own specifications and Authority Hub.
Cleaning capacity represents only one product attribute. The US Conec cleaner also provides manufacturer-defined antistatic performance, non-fraying cleaning material and a recognised US Conec part number. Therefore, customers should select according to the complete requirement rather than one number.
Typical applications include data centres, telecommunications facilities, cable assembly factories, laboratories, commissioning projects and field maintenance.
The US Conec IBC MPO Cleaner Knowledge Centre will provide focused guidance across product identification, IBC™ cleaning technology, MTP® and MPO compatibility, inspection procedures, maintenance and procurement. As the Knowledge Centre expands, each section will help customers select and use the genuine US Conec cleaning product correctly.
First, this section will explain the IBC™ cleaner range, the MPO II product and the role of US Conec part number 7104.
Articles coming soon.
Next, this section will explain the relationship between MTP®, MPO connectors and MT ferrules. It will also help users identify the correct cleaner for each connector interface.
Articles coming soon.
This section will examine the IBC™ MPO II cleaning mechanism. In particular, it will explain why static control and non-fraying cleaning material matter in controlled fibre environments.
Articles coming soon.
Here, articles will cover inspect-clean-inspect workflows, behind-the-panel access and the correct handling of unmated connectors.
Articles coming soon.
This section will explore cleaner selection for high-density data centres, test laboratories, cable assembly factories and telecommunications facilities.
Articles coming soon.
Finally, this section will explain manufacturer part numbers, approved product lists, stock planning and the differences between US Conec and alternative cleaning products.
Articles coming soon.
The US Conec IBC MPO Cleaner combines a recognised manufacturer identity with practical push-style operation. Its antistatic system, non-fraying cleaning material and dual connector-and-adaptor capability support disciplined MPO and MTP® maintenance.
Furthermore, its 525+ engagement capacity provides practical service life for production, installation and maintenance teams. Part number 7104 also gives procurement departments a clear reference for repeat ordering and approved-product documentation.
Choose this cleaner when your project requires the genuine US Conec IBC™ Brand Cleaner MPO II. Alternatively, review the RapidConnect cleaner when the project calls for a general-purpose MTP/MPO cleaning option.
Contact Anderson Corporation for pricing, availability or assistance confirming compatibility with your multifibre connector system.
Be sure to check out the rest of the Anderson Product Range for other fibre optic cleaning products!
Check out the official Anderson Corporation YouTube Channel for more Fibre Optic Information!
