- (61) 3 9761 7600
- sales@andcorp.com.au
The RapidConnect 144 Fibre MTP MPO Enclosure supports twelve dedicated 12-fibre cassettes within 1RU. Each cassette uses three Quad LC adaptors to provide twelve individual LC connections. When fully populated, the E1144P delivers 144 fibres or 72 duplex LC circuits with MTP® Elite or low-loss MPO connectivity.
The 144 Fibre MTP MPO Enclosure provides high-density fibre connectivity within only 1RU of rack space. Designed for up to twelve dedicated 12-fibre cassettes, the RapidConnect E1144P supports as many as 144 individual LC fibre connections. Therefore, organisations can increase fibre density without sacrificing modularity, accessibility or organised cable management.
Each cassette contains three Quad LC adaptors at the front. Because every Quad LC adaptor provides four individual LC ports, each cassette supports twelve fibres or six duplex LC circuits. Meanwhile, one 12-fibre MTP® Elite or low-loss MPO connector at the rear provides the multifibre trunk interface.
The E1144P suits data centres, telecommunications facilities, enterprise networks, equipment rooms and other high-density indoor fibre environments. Moreover, its modular architecture allows organisations to install cassettes progressively as their network requirements develop.
Rack space is valuable in modern communications infrastructure. As fibre counts increase, network designers must accommodate more connections without filling cabinets with additional enclosures. Therefore, the E1144P supports up to 144 fibres within a single rack unit.
The enclosure accepts up to twelve dedicated 12-fibre MTP/MPO cassettes. Each cassette contains three Quad LC adaptors, while each adaptor provides four individual LC ports. Consequently, a fully configured enclosure provides:
This level of density makes the enclosure particularly useful where several trunk cables must connect to switches, servers, storage equipment or other network hardware. Additionally, the modular cassette arrangement separates the total capacity into manageable 12-fibre groups.
As a result, technicians can identify and manage individual groups of connections without disturbing the entire installation. Furthermore, the enclosure can support current requirements while preserving cassette positions for future expansion.
The E1144P reaches its 144-fibre capacity through twelve individual cassette positions. Each cassette contributes twelve front-facing LC fibre connections and one rear 12-fibre MTP or MPO connection.
The calculation is therefore straightforward:
| E1144P configuration | Capacity |
|---|---|
| Maximum number of cassettes | 12 |
| Quad LC adaptors per cassette | 3 |
| Individual LC ports per Quad adaptor | 4 |
| Individual LC connections per cassette | 12 |
| Duplex LC circuits per cassette | 6 |
| Maximum Quad LC adaptors | 36 |
| Maximum individual LC connections | 144 |
| Maximum duplex LC circuits | 72 |
The 144-fibre rating refers to individual optical fibres. However, most duplex Ethernet and Fibre Channel applications use two fibres for each circuit. Therefore, the fully populated enclosure supports up to 72 duplex LC circuits.
This distinction matters during network design. Accordingly, designers should calculate both the number of individual fibres and the number of duplex equipment connections required.
The E1144P uses dedicated compact 12-fibre cassettes. Unlike the cassette format used by the 96 Fibre MTP/MPO Enclosure, these modules allow twelve separate cassette positions within the E1144P.
Each 12 Fibre MTP/MPO Cassette provides:
Because every cassette represents a defined 12-fibre group, network designers can create an organised port structure. For example, individual cassettes can correspond with particular cabinets, switches, network zones or services.
Furthermore, the enclosure does not need to be fully populated from the beginning. Instead, an organisation can install only the cassettes required for the initial deployment. Additional modules can then be fitted as demand increases.
Consequently, the E1144P provides both high maximum density and practical scalability.
Each E1144P cassette presents three Quad LC adaptors at the front. In turn, each Quad LC adaptor accommodates four individual LC connections. Therefore, the three adaptors deliver twelve individual fibres from each cassette.
The Quad LC format contributes directly to the enclosure’s high density. Moreover, it maintains the familiar LC interface commonly used by switches, servers, storage equipment and optical transceivers.
When configured for duplex transmission, the twelve LC ports create six duplex circuits. However, the individual fibres remain separately accessible at the front of the cassette.
This architecture provides several benefits:
Nevertheless, high-density connectivity requires disciplined patch lead management. Therefore, suitable horizontal or vertical cable management should accompany the enclosure.
The 144 Fibre MTP/MPO Enclosure can form part of either an MTP® Elite or a low-loss MPO structured cabling system. Although both options use the MPO interface, they serve different project requirements.
MTP is a registered trademark of US Conec. An MTP connector is an engineered MPO connector that incorporates additional mechanical features intended to support precise alignment and repeatable mating.
RapidConnect MTP configurations use MTP® Elite connectivity for projects that prioritise premium optical performance. In contrast, RapidConnect low-loss MPO configurations provide a high-quality standards-based option for projects requiring a different balance between performance and project cost.
However, the enclosure alone does not determine channel performance. Instead, optical performance depends on the complete link, including:
Therefore, the enclosure, cassettes and trunk cables should be specified as one coordinated system.
One 12-fibre MTP or MPO connection sits at the rear of each cassette. Consequently, one compact multifibre connector transports the fibres required for all twelve front-facing LC ports.
This approach reduces the number of separate cables entering the enclosure. Moreover, it simplifies deployment because the trunk cable arrives pre-terminated to the required connector, length, fibre type, gender and polarity.
The E1144P can integrate with either of Anderson Corporation’s dedicated trunk cable platforms:
Because the two platforms have different connector and performance characteristics, each cassette must match its intended trunk cable. Additionally, connector gender, key orientation and polarity must work together across the complete channel.
Anderson Corporation can configure these components around the project specification. Therefore, customers can order a coordinated enclosure system rather than attempting to match each technical variable independently.
Traditional fibre deployment may require onsite cable preparation, splicing, connector installation or polishing. These processes can increase labour requirements and introduce additional installation variables.
In contrast, the RapidConnect system uses pre-terminated trunk cables and factory-assembled cassettes. First, the installer routes and secures the trunk cable. Next, the MTP or MPO connector plugs into the corresponding cassette. Finally, LC patch leads connect the front of the cassette to the active equipment.
As a result, the system can provide:
Nevertheless, plug-and-play construction does not remove the need for correct system design. Installers must still confirm fibre type, polarity, connector gender, port allocation and optical performance.
Therefore, every channel should be specified before manufacture and tested after installation.
Reliable high-density connectivity depends on consistent termination. For this reason, RapidConnect MTP/MPO trunk cables and cassettes use factory-terminated assemblies.
Controlled manufacturing conditions help reduce the variability associated with onsite connector installation. Furthermore, factory testing verifies component performance before the assemblies reach the project.
This approach becomes especially valuable when an installation requires numerous repeated links. For example, a data centre may need identical connections between several equipment cabinets and a central distribution area. Factory-built assemblies can provide consistent lengths, connector arrangements and polarity configurations across those links.
However, factory testing does not remove the need for onsite inspection. Connector end faces can still collect contamination during transport, handling or installation. Accordingly, technicians must inspect and clean connectors before mating them.
The E1144P can support singlemode or multimode cassette and trunk configurations. Therefore, designers can specify the enclosure for different transmission distances, applications and equipment interfaces.
Available project configurations may include:
Singlemode and multimode components should not be mixed within the same channel unless a qualified designer has created a specific conversion arrangement. Additionally, adapter and connector colours should help identify the installed fibre category and polish.
Bend-insensitive fibre can assist performance within compact cassettes and crowded rack environments. However, bend-insensitive construction does not permit uncontrolled handling. Installers must still maintain the specified minimum bend radius.
Before ordering, the network designer should confirm:
Anderson Corporation can then configure the enclosure components to suit the defined optical channel.
Polarity determines how transmitting fibres connect with the corresponding receiving fibres. Because an MTP or MPO connector contains several fibres within one ferrule, polarity must be coordinated throughout the channel.
Common multifibre polarity methods include Type A, Type B and Type C. However, the correct method depends on the network architecture, trunk cable construction, cassette wiring and patch lead arrangement.
A connector may appear physically compatible while still producing an incorrect fibre path. Therefore, installers should never determine compatibility by connector appearance alone.
Before manufacture, the project specification should identify:
Clear documentation is equally important. Consequently, cassette schedules, port assignments and polarity records should remain with the installed system.
Each cassette provides twelve individual LC ports through three Quad LC adaptors. Therefore, technicians can connect standard LC patch leads between the cassette and compatible network equipment.
The compact LC interface supports high-density equipment patching. Additionally, the defined cassette boundaries make the front panel easier to organise than an undivided field of ports.
The front arrangement supports:
However, patch leads must follow an organised route. Excessive congestion can obscure labels, restrict access and place stress on connectors.
Accordingly, patch lead lengths should suit the actual equipment layout. Moreover, suitable rack management should guide the leads away from the cassette faces.
High fibre density depends on disciplined cable management. Therefore, the E1144P includes protected rear cable entry points and multiple cable tie-down locations.
Abrasion protection helps prevent incoming trunk cables from contacting exposed metal edges. Meanwhile, the tie-down points allow installers to control cable movement near the cassette connectors.
Correct rear management should:
Installers should not overtighten cable ties or other retaining devices. Instead, each trunk should be secured firmly enough to restrict unwanted movement without crushing its jacket.
Additionally, service loops must be planned carefully. Poorly managed excess cable can block equipment access, restrict airflow and increase the risk of fibre damage.
The E1144P includes a removable front protective cover. This cover helps shield the cassette faces and LC connections from incidental contact.
When technicians need to install, inspect or change a connection, they can remove the cover to access the cassette fronts. Afterwards, they can refit the cover to restore protection.
However, the cover should not contain excessive patch lead congestion. Instead, patch leads should pass through appropriate rack management hardware.
Therefore, network designers should consider the enclosure, cable managers and active equipment as one coordinated patching area.
Fibre networks rarely remain static. New equipment may be installed, additional services may become necessary and connections may move between cabinets.
The modular cassette architecture helps simplify these changes. For example, technicians can add another 12-fibre cassette when extra capacity becomes necessary. Similarly, an individual cassette can be replaced without rebuilding every connection within the enclosure.
The modular arrangement supports:
Nevertheless, technicians must document every change. Consequently, labels, rack elevations and fibre schedules should be updated whenever the installed configuration changes.
The E1144P suits indoor rack environments that require high-density and modular fibre connectivity.
Data centres frequently require large numbers of fibre links between core, aggregation, distribution and equipment areas. Because the E1144P supports 144 fibres within 1RU, it helps conserve valuable rack space.
Additionally, factory-terminated trunks can support consistent deployment between multiple cabinets or network zones. Therefore, the enclosure is suitable for both new data centre builds and structured network upgrades.
Large offices, campuses and corporate facilities may use high-count fibre backbones between communications rooms. In these environments, the E1144P provides an organised transition between multifibre trunks and equipment-facing LC connections.
Furthermore, the modular layout supports staged growth as additional network capacity becomes necessary.
Telecommunications environments often contain extensive optical connectivity. Consequently, the enclosure can help organise trunk links while reducing the number of separate incoming cables.
Moreover, the individual cassette groups can simplify service identification and maintenance.
Colocation environments require clear separation between customer, cabinet and service connections. Therefore, individual 12-fibre cassettes can provide defined groups for particular network paths.
Additionally, the cassette-based format supports future reconfiguration without replacing the entire enclosure.
High-performance computing environments may require many optical connections within restricted rack areas. Accordingly, the E1144P can support structured connectivity while preserving rack space for active equipment.
The enclosure can also serve central communications rooms where multiple fibre links converge. However, designers must match the selected cassette, trunk and patch lead configuration with the installed equipment.
Both RapidConnect platforms provide modular MTP/MPO connectivity within 1RU. However, they use different cassette architectures and address different density requirements.
| Feature | E1144P 144 Fibre Enclosure | 96 Fibre Enclosure |
|---|---|---|
| Maximum fibre capacity | 144 fibres | 96 fibres |
| Maximum duplex LC circuits | 72 | 48 |
| Rack height | 1RU | 1RU |
| Cassette architecture | Dedicated compact 12-fibre cassettes | Conventional 24-fibre cassettes |
| Maximum cassette quantity | 12 | 4 |
| Best suited to | Maximum modular density | Standard high-density deployment |
The E1144P provides 50% more fibre capacity within the same rack height. Moreover, its twelve smaller cassette groups allow the capacity to be divided into individual 12-fibre modules.
By comparison, the 96-fibre enclosure uses four larger cassette positions. Therefore, it may provide a simpler physical configuration where 96 fibres meet the project requirement.
The correct enclosure depends on more than maximum capacity. Accordingly, designers should consider:
Anderson Corporation can help match the enclosure architecture with the intended network design.
The enclosure forms only one part of the complete optical channel. Therefore, every associated component should be selected as part of a coordinated system.
Before requesting a quotation, confirm the following details where possible:
If some details remain uncertain, Anderson Corporation can review the application. However, the intended equipment interfaces and network standards should remain available during that process.
This planning stage is particularly important for polarity. Because every component contributes to the final fibre path, the trunk cable, cassette and patching arrangement must create the correct transmit-to-receive relationship.
Although pre-terminated systems reduce onsite termination work, installers must still handle every component carefully.
First, installers should:
Next, installers should:
Finally, installers should:
Together, these steps help protect optical performance and long-term maintainability.
Contamination is a common cause of fibre connection problems. Dust, oil and microscopic debris can interfere with light transmission or damage connector end faces during mating.
MTP and MPO connectors require particular care because several fibres share one ferrule. Therefore, one contaminated multifibre connector can affect several network channels.
A suitable inspection and cleaning process should follow this sequence:
The RapidConnect MTP/MPO One-Click Cleaner provides a purpose-designed cleaning option for multifibre connector end faces. However, technicians must use every cleaning device according to its instructions and the site’s fibre handling procedures.
Protective caps reduce exposure during storage and transport. Nevertheless, they do not guarantee that a connector is clean. Consequently, technicians should inspect every connector after removing its cap.
Every installed channel should be tested against the project’s acceptance criteria. The exact procedure will depend on the network standard, fibre type, link length and contractual requirements.
Testing may include:
Test references and launch conditions must suit the installed fibre and connector system. Additionally, the results should identify the relevant trunk, cassette and front port.
Complete records make future troubleshooting easier. Therefore, commissioning documentation should remain with the network owner after project completion.
| Specification | Details |
|---|---|
| Product | RapidConnect 144 Fibre MTP/MPO Enclosure |
| Ordering code | E1144P |
| Mounting format | 19-inch rack mount |
| Rack height | 1RU |
| Maximum fibre capacity | 144 individual fibres |
| Maximum duplex LC circuits | 72 |
| Maximum cassette capacity | 12 × 12-fibre cassettes |
| Quad LC adaptors per cassette | 3 |
| Maximum Quad LC adaptors | 36 |
| Front cassette interface | 3 × Quad LC adaptors providing 12 individual LC connections |
| Rear cassette interface | 1 × 12-fibre MTP® Elite or low-loss MPO connector |
| Supported fibre categories | Singlemode or multimode, as specified |
| Dimensions | 480 × 225 × 50 mm |
| Weight | 1.6 kg |
| Front protection | Removable protective cover |
| Rear cable management | Protected entries and multiple tie-down points |
| System format | Factory-terminated modular cassette system |
Specifications and component availability should be confirmed when ordering.
RapidConnect MTP/MPO systems combine enclosures, cassettes, trunk cables and cleaning products within a coordinated connectivity platform.
The E1144P provides:
Most importantly, the system can be configured around the project rather than forcing the project into one fixed arrangement.
A 144 Fibre MTP MPO Enclosure is a rack-mounted housing that transitions multifibre MTP or MPO trunk connections into individual LC fibre connections. Specifically, the RapidConnect E1144P provides up to 144 fibres within 1RU.
The E1144P accepts up to twelve dedicated 12-fibre cassettes. Therefore, a fully populated enclosure supports 144 individual fibres.
Each cassette contains three Quad LC adaptors. Because every adaptor supports four individual LC ports, the cassette provides twelve individual fibre connections.
A fully populated E1144P contains 36 Quad LC adaptors. That total comes from three Quad LC adaptors across each of the twelve cassette positions.
The enclosure provides up to 144 individual LC connections. Consequently, it can support as many as 72 duplex LC circuits.
The E1144P uses dedicated 12-fibre cassettes. Each cassette contains three Quad LC adaptors at the front and one 12-fibre MTP or MPO connection at the rear.
Yes. Because the enclosure has a modular design, it can be partially populated. Additional cassettes can therefore be installed as network requirements grow.
MPO describes the recognised multifibre connector interface. Meanwhile, MTP is a US Conec-engineered MPO connector that incorporates additional mechanical design features. RapidConnect systems are available with MTP® Elite or low-loss MPO connectivity.
MTP connectors use the MPO interface. However, physical compatibility alone does not confirm complete channel compatibility. Connector gender, key orientation, polarity, fibre type and optical performance must also align.
The required configuration should be confirmed when requesting a quotation. Because the enclosure can be populated progressively, cassette quantities can vary between projects.
Yes. The enclosure can be configured with singlemode cassettes and matching trunk cables. However, every component within the channel must use compatible fibre and connector specifications.
Yes. OM4 configurations are available where specified. Additionally, the trunk cables, cassettes and patch leads must all match the chosen multimode system.
Polarity depends on the selected cassette and trunk configuration. Therefore, the intended polarity method or overall channel design should be confirmed before manufacture.
RapidConnect trunk cables and cassette assemblies are factory terminated and tested. Nevertheless, installers should inspect, clean and test the complete channel after installation.
No. Although plug-and-play construction reduces onsite termination, it does not replace connector inspection, polarity verification or completed-link testing.
Yes. Because it combines 144-fibre capacity, a 1RU format and modular cassettes, the enclosure suits high-density data centre connectivity.
The E1144P supports up to 144 fibres through twelve 12-fibre cassettes. In contrast, the 96-fibre model supports up to 96 fibres through four conventional 24-fibre cassette positions.
Technicians should use an inspect-clean-inspect process and a cleaner designed for multifibre connectors. Furthermore, they should never mate a connector until its end face has been confirmed as clean.
The 144 Fibre MTP/MPO Enclosure Knowledge Centre will provide focused guidance about selecting, configuring, installing and maintaining the RapidConnect E1144P platform. As the Knowledge Centre expands, each article will address a specific decision associated with this high-density enclosure.
First, this section will explain how the E1144P achieves 144-fibre capacity within 1RU. It will also examine the relationship between twelve cassettes, 36 Quad LC adaptors, 144 individual LC connections and 72 duplex LC circuits.
Articles coming soon.
Next, this section will cover cassette quantities, progressive population and fibre capacity planning. Therefore, network designers will be able to match the enclosure configuration with present and future requirements.
Articles coming soon.
This section will explain how three Quad LC adaptors provide twelve individual fibre connections within each cassette. Additionally, it will examine LC port identification and duplex circuit allocation.
Articles coming soon.
This section will focus on selecting the correct rear multifibre interface. In particular, it will explain how connector grade contributes to the complete enclosure channel.
Articles coming soon.
Correct polarity remains essential in any cassette-based system. Accordingly, this section will explain how trunk polarity, connector gender and cassette wiring interact within the E1144P.
Articles coming soon.
This section will examine rack placement, rear trunk routing, service loops, bend radius and front patch lead management. Moreover, it will provide guidance for maintaining access within a fully populated enclosure.
Articles coming soon.
Finally, this section will cover connector inspection, multifibre cleaning and completed-link testing. It will also explain how documented commissioning supports reliable long-term operation.
Articles coming soon.
The RapidConnect E1144P combines up to 144 fibres, twelve modular cassette positions and 36 Quad LC adaptors within only 1RU. Therefore, it provides a scalable platform for high-density data centre, telecommunications and enterprise fibre networks.
However, cassette quantity, fibre category, connector grade, gender and polarity must work together. Anderson Corporation can configure the enclosure, cassettes and trunk cables around your project requirements.
Request a Quote for the E1144P 144 Fibre MTP/MPO Enclosure
Finally, visit the Anderson Fibre Products YouTube channel for product demonstrations and further fibre optic information.
