How to Order Custom Pre Terminated Fibre Cables
When time is tight and precision matters, ordering custom pre terminated fibre cables can save hours on-site while ensuring your network meets performance, durability, and compliance standards. These ready-to-install cables are tailored to your exact specifications—whether you need Singlemode or Multimode fibre, LC or SC connectors, or specific fibre core counts for rack-to-rack or campus links. By understanding the options available and how to specify them correctly, you can reduce risk, simplify installation, and achieve the perfect fit for your next fibre deployment.
For a foundational overview, visit the Pre Terminated Fibre Optic Cable – A Complete Guide
Need a custom solution? Explore our RapidConnect Pre Terminated Fibre Optic Cable Australia range or request a quotation.
What are Custom Pre Terminated Fibre Cables?
Definition of Custom Pre Terminated Fibre
A custom pre terminated fibre assembly is a factory-built fibre optic cable, pre-cut and connectorised to your exact requirements. Unlike standard off-the-shelf lengths, these assemblies are built to suit specific installation environments. You select the cable type, core count, fibre mode, connector style, and length—then receive a plug-and-play product ready for installation.
These assemblies arrive fully tested, labelled, and optionally fitted with a pulling eye to protect connectors during installation.
Benefits of Ordering Custom Pre Terminated Fibre
Custom solutions deliver significant advantages for both installers and project managers:
- You avoid on-site termination and splicing.
- You reduce labour costs and speed up deployment.
- You eliminate errors linked to inconsistent field work.
- You ensure better routing in constrained spaces.
By choosing a custom pre terminated fibre solution, you control every variable that impacts reliability and performance—right from the start.
For connector options and field-proven tips, see: Pre Terminated Fibre with MPO/MTP Explained
Learn why testing is still critical: Pre Terminated Fibre Testing – How to Verify Performance
Key Specs You’ll Need to Know Before Ordering Custom Pre Terminated Fibre Cables
Before placing an order, it’s essential to understand the key technical specifications of your custom pre terminated fibre. Each choice affects installation success, performance, and long-term reliability. The good news? When you get these specs right up front, everything else becomes easier—faster ordering, faster deployment, and better results on site.
1. Select Your Fibre Type (Singlemode or Multimode)
Start by choosing the correct fibre mode. Singlemode (OS2) is ideal for long-distance links and future scalability. Multimode (OM1, OM3, OM4) is better suited for short-to-medium distances within buildings or data centres.
Consider distance, bandwidth, and network speed requirements before selecting your type.
2. Choose the Core Count You Need
The most common custom pre terminated fibre configurations include 2, 6, 12, 24, or 48 fibre cores. Select the count based on your port density, current capacity, and anticipated expansion.
For example, use 6 or 12 cores for rack-to-rack patching. Choose 24 or 48 cores for higher-density backbone runs.
3. Pick the Right Connectors
Connector selection is critical. LC is the most common for data networks. SC and ST are also used—often for legacy or industrial applications. For low-reflection environments, consider SCA connectors with APC polish.
Remember: connector type must match your patch panels or transceivers.
4. Confirm the Cable Construction
Do you need indoor or outdoor-rated cable? If so, choose tight buffered cable for indoor installs and loose tube for outdoor or longer runs. Look for UV-resistant jackets and water-blocking if you’re installing between buildings or through risers.
Additionally, check fire rating compliance when installing in commercial buildings.
Reference: AS/CA S009
5. Decide If You Need a Pulling Eye
If the cable will be pulled through conduits or risers, always include a pulling eye. This pre-installed feature protects the connectors and simplifies routing.
Not sure if you need one? When in doubt, add it—it reduces risk during tight installs.
For practical install advice, visit: How to Install Pre Terminated Fibre Optic Cables
Steps to Order Custom Pre Terminated Fibre Cables
Ordering a custom pre terminated fibre assembly is straightforward when you follow a clear process. By preparing the right specifications and asking the right questions, you can avoid errors, reduce lead time, and ensure that the final product is installation-ready.
Follow the steps below to streamline your ordering experience.
Step 1: Define the Fibre Type
Choose between Singlemode (OS2) or Multimode (OM1, OM3, OM4). Your decision depends on distance, bandwidth, and network hardware. If you’re unsure, consult your switch or transceiver specifications.
Step 2: Confirm the Required Length
Measure the total distance of the cable path, including any slack needed for routing. It’s always better to round up than fall short. Most suppliers—including us—offer standard increments like 25 m, 50 m, or custom lengths on request.
Step 3: Select the Fibre Core Count
Determine how many cores your link will require. Standard options include 2, 6, 12, 24, and 48 cores. If you’re installing in a data centre or a high-capacity riser, opt for 24 or 48 cores to future-proof your infrastructure.
Step 4: Choose Connector Types for Each End
Specify the connector style for both ends of the cable—typically LC, SC, ST, or SCA. Make sure these match your patch panels and network equipment. You can also choose different connectors on each end if needed.
Step 5: Identify Indoor or Outdoor Use
Let your supplier know if the cable will be installed inside a building, outdoors, or across both. This affects jacket type, moisture resistance, and compliance with installation standards.
Step 6: Add Pulling Eye if Needed
For easier installation through conduits or ducts, request a pulling eye on at least one end. This helps prevent stress on the connectors during pulls.
For connector and build options, see: Pre Terminated vs Field Terminated Fibre – Which is Best?
Also review: Pre Terminated Fibre Optic Cable – A Complete Guide
Need a custom solution? Explore our RapidConnect Pre Terminated Fibre Optic Cable Australia range or request a quotation.
Connector Options for Custom Pre Terminated Fibre Cables
Choosing the right connector is critical when ordering custom pre terminated fibre. Connector types affect signal quality, compatibility, and ease of installation. While LC is the most common choice in modern networks, SC, ST, and SCA all have their place—especially in legacy or industrial environments.
The table below compares the most common connector types used in custom pre terminated fibre assemblies.
LC vs SC vs ST vs SCA in Custom Pre Terminated Fibre
| Connector | Typical Use | Form Factor | Polish Type | Notes |
|---|---|---|---|---|
| LC | Data centres, switches | Small form (SFF) | UPC / APC | Most popular; supports high-density panels |
| SC | Telecom, patch panels | Square form | UPC / APC | Rugged and simple to connect/disconnect |
| ST | Industrial, older networks | Round bayonet-style | UPC | Twist-lock design; common in legacy installs |
| SCA | Low-reflection applications | Angled connector | APC (angled) | Reduces back-reflection; used in OS2 links |
If you’re not sure which connector suits your application, choose LC for high-density racks or SCA for long-haul singlemode links.
Related topic: How a Pre Terminated Fibre Installation Reduces Total Costs
See full spec range: Pre Terminated Fibre Optic Cable – A Complete Guide
Common Applications for Custom Pre Terminated Fibre Cables
Custom fibre assemblies are not limited to one industry or use case. Because they’re built to exact specifications, they support a wide range of commercial, industrial, and enterprise applications. From high-speed data centres to inter-building backbone links, custom pre terminated fibre offers flexibility, speed, and proven reliability.
Where Custom Pre Terminated Fibre Cables Are Used
1. Data Centres
High-density LC-LC patching and short OM4 multimode runs make data centres a perfect fit. These cables arrive ready to install, reducing deployment time across racks and cabinets.
2. Enterprise Backbones
In campus networks or large office buildings, custom-length singlemode cables with SC or SCA connectors are ideal for long-distance, high-bandwidth links.
3. Commercial Building Risers
Tight buffered indoor/outdoor fibre with pulling eyes simplifies installation in riser shafts and conduit pathways. Use 6, 12, or 24 cores depending on port count.
4. Industrial and Warehouse Networks
SC or ST pre terminated cables are common in rugged environments. Select water-resistant jackets or protective tubing when needed.
5. Server Room Upgrades
When retrofitting or upgrading a server room, custom pre terminated fibre ensures clean, well-labelled cabling that meets specific length and core count needs.
For core fibre choices by environment, explore: Singlemode vs Multimode Pre Terminated Fibre – Key Differences
Reference guide: Pre Terminated Fibre Optic Cable – A Complete Guide
FAQs About Custom Pre Terminated Fibre
1. How do I order a Custom Pre Terminated Fibre Cables?
To place an order, you’ll need to specify several details. Start by confirming your fibre type (Singlemode or Multimode), core count, connector styles, and total cable length. Additionally, let your supplier know if the cable will be installed indoors, outdoors, or through conduit. You can also request pulling eyes for easier installation.
2. Can I get different connectors on each end of the cable?
Yes, you can. In fact, many projects require LC on one end and SC, ST, or SCA on the other. This is common when connecting different patch panels or adapting new equipment to existing infrastructure. Just make sure to label the ends clearly during installation.
3. What’s the typical lead time for Custom Pre Terminated Fibre Cables?
Most assemblies are manufactured within 3–5 business days. However, larger or specialised orders may take longer. Be sure to confirm lead times with your supplier before planning your install date.
4. Should I include a pulling eye in my order?
In most cases, yes. A pulling eye helps protect the pre installed connectors during cable routing, especially when pulling through conduits or riser spaces. If your install involves tight spaces or long runs, a pulling eye is strongly recommended.
5. Are these assemblies compliant with Australian standards?
Absolutely. All Custom Pre Terminated Fibre assemblies we supply are built to meet AS/CA S009 wiring standards. We also follow relevant ISO/IEC guidelines for fibre loss, labelling, and test procedures. For test tools, see Yamasaki Optical Technology.
Order Custom Pre Terminated Fibre Cables with Confidence
When it comes to fibre installation, precision matters. That’s why more installers, integrators, and IT managers are choosing custom pre terminated fibre to reduce time on-site and eliminate costly errors. Rather than splicing or terminating cables in the field, you can order assemblies built to your exact needs—with the correct connectors, fibre mode, core count, and jacket type from the start.
Moreover, by ordering the right cable from the beginning, you streamline installation, reduce waste, and maintain compliance with Australian cabling standards. Whether you’re connecting racks in a data centre or running fibre between buildings, a tailored solution ensures performance and simplicity.
Additionally, pre assembled fibre cables come factory-tested, labelled, and optionally fitted with a pulling eye—so they’re ready to install straight out of the box.
Ready to get started? Explore our full guide here:
Pre Terminated Fibre Optic Cable – A Complete Guide
Need help choosing specifications or understanding your options? Contact our team today and let us help you configure the right custom pre terminated fibre solution for your next project.