When Does Underground Fibre Need CST Armour?

CST armour assessment for underground fibre routes showing rodent exposure, crush and impact risks, direct burial and critical routes

Share post

When Does Underground Fibre Need CST Armour?

Choosing CST armour for underground fibre depends on the mechanical risks surrounding the cable throughout its working life. Although every underground route requires suitable environmental protection, not every route needs metallic armour. Therefore, designers should assess the pathway, soil conditions, rodent exposure, installation method and consequences of failure before specifying the cable.

Corrugated steel tape provides a strong physical barrier around the cable core. As a result, it can improve resistance to crushing, impact and rodent damage. However, CST armour cannot correct poor route design, unsuitable backfill, excessive pulling tension or inadequate joint sealing.

The decision should therefore begin with the route risk rather than the assumption that every underground cable requires the strongest available construction.

Anderson Corporation’s RapidConnect C-Series CST Armoured Loose Tube Fibre Optic Cable is designed for demanding underground routes where additional mechanical protection is justified.

What Is CST Armour?

CST stands for corrugated steel tape. During cable manufacture, a thin steel tape is formed around the protected loose tube cable core. An outer polyethylene jacket then covers the armour and separates it from the surrounding environment.

The corrugations allow the steel layer to move with the cable while maintaining physical coverage around the core. Consequently, the armour can resist localised forces without turning the cable into a completely rigid structure.

If you are unfamiliar with the construction, What Is CST Armoured Fibre Optic Cable? explains the basic components and purpose of the cable.

In addition, our guide to corrugated steel tape armour examines how the metallic layer contributes to mechanical protection.

When Does Underground Fibre Need CST Armour?

Underground fibre needs CST armour when the assessed mechanical threats exceed the protection provided by the pathway, cable jacket and surrounding materials.

In practical terms, CST armour for underground fibre becomes appropriate when one or more of the following conditions apply:

  • Rodents are present or reasonably expected along the route.
  • The cable may experience significant crushing pressure.
  • Sharp rocks or unsuitable backfill could create localised loads.
  • Construction or maintenance activity may disturb the route.
  • The cable passes through an industrial or operational area.
  • The pathway provides limited mechanical protection.
  • Network failure would cause serious operational disruption.
  • The expected service life justifies additional physical protection.

No single condition automatically determines the correct cable. Instead, the combined risk profile should guide the specification.

Routes With Known Rodent Exposure

Rodent activity is one of the clearest reasons to consider CST armour.

Rodents do not generally seek fibre itself as a food source. Nevertheless, they may gnaw cable jackets while exploring, maintaining their teeth or clearing an obstruction. Once they penetrate the outer jacket, they can damage water-blocking materials, buffer tubes and optical fibres.

A standard polyethylene jacket provides environmental coverage, but it does not offer the same physical barrier as corrugated steel tape. Therefore, routes near food-processing facilities, agricultural properties, waste areas, grain storage sites, waterways and known rodent habitats may justify metallic armour.

However, CST cable should still be positioned and installed correctly. Steel armour improves rodent resistance, but no underground cable should be described as completely immune to every form of animal damage.

Direct-Burial Routes With Mechanical Exposure

Direct-burial installation places the cable much closer to the surrounding soil, backfill and civil environment. Consequently, the cable may encounter forces that a protected conduit installation would normally absorb.

For example, rocks can concentrate pressure on a small section of the cable. Meanwhile, soil movement, ground settlement and repeated vehicle loading can increase mechanical stress over time.

For these reasons, CST armour for underground fibre may be suitable where direct burial is permitted and the complete cable construction is approved for the intended application.

However, armour alone does not make every cable suitable for direct burial. The project must also consider:

  • Manufacturer-approved installation methods
  • Burial depth
  • Route marking
  • Bedding and backfill materials
  • Drainage conditions
  • Minimum bend radius
  • Maximum pulling tension
  • Cable entry and joint-sealing arrangements
  • Applicable project and regulatory requirements

Therefore, the cable specification and route design must work together.

Conduit Routes That Still Carry Risk

A common assumption is that any cable installed in conduit no longer requires armour. In reality, conduit can reduce mechanical exposure without eliminating it.

CST armour may still be justified where conduits are:

  • Damaged, distorted or partially collapsed
  • Shared with other approved services
  • Frequently accessed for additional cable hauling
  • Located in rodent-prone pits
  • Exposed to flooding, silt or debris
  • Installed below heavy industrial traffic
  • Difficult or expensive to replace
  • Connected through poorly controlled maintenance areas

In addition, a cable can suffer damage while being pulled into an otherwise sound conduit. Excessive pulling tension, tight bends and poorly prepared conduit entries can damage the jacket or deform the cable.

Accordingly, the presence of conduit should form part of the assessment rather than end it.

Industrial Underground Fibre Routes

Industrial facilities often create a stronger case for CST armour for underground fibre because their routes operate within active mechanical environments.

Heavy vehicles may cross cable alignments repeatedly. Excavation can also occur during plant upgrades, drainage work, equipment installation and civil maintenance. Furthermore, pits and conduits may be opened by several contractors over the life of the network.

Typical higher-risk locations include:

  • Manufacturing facilities
  • Processing plants
  • Water and wastewater sites
  • Transport depots
  • Warehouses and distribution centres
  • Mining and mineral-processing operations
  • Utility compounds
  • Large infrastructure facilities

Although the cable remains underground, the surrounding route may experience frequent operational change. Therefore, additional mechanical protection can provide valuable resilience.

Routes With High Crushing or Impact Risk

Crush and impact are different forms of mechanical stress.

Crushing generally applies pressure over a period of time. For example, ground settlement or a heavy load above the route can compress the cable. Impact, by contrast, involves a sudden concentrated force, such as a dropped object or a tool striking the cable.

Corrugated steel tape helps distribute these forces around the cable core. Consequently, it reduces the likelihood that a localised load will reach the loose tubes and optical fibres directly.

However, CST armour has defined performance limits. It does not make the cable indestructible. Designers should therefore compare the manufacturer’s mechanical ratings with the expected installation and operating conditions.

Our article on steel armoured fibre optic cable for underground installations provides further guidance on the relationship between steel armour and underground installation conditions.

Critical Routes Where Failure Has Serious Consequences

Cable selection should consider not only the probability of damage but also the consequences.

A route serving a non-critical connection may tolerate a different level of risk from one carrying process control, operational communications, security systems or essential network traffic.

Therefore, CST armour for underground fibre may be justified when a failure could:

  • Stop production
  • Isolate an operational facility
  • Interrupt monitoring or control systems
  • Affect public infrastructure
  • Create a lengthy restoration process
  • Require extensive excavation
  • Prevent access to essential data or communications

In these cases, the additional cable protection may represent a relatively small part of the total project cost. Meanwhile, the financial and operational cost of repairing a failed route may be substantial.

Water-Prone Routes

Wet ground does not automatically create a need for steel armour because CST primarily provides mechanical protection. Nevertheless, water-prone routes often combine several risks.

For example, water movement can carry silt into conduits, weaken surrounding soil or contribute to route settlement. Flooded pits may also conceal damaged ducts, sharp edges and compromised cable entries.

Therefore, CST armour may form one part of a broader protection system. However, the cable must also use suitable water-blocking materials, and installers must seal joints and entries correctly.

Steel armour does not replace effective water-blocking construction. Likewise, a water-blocked cable does not automatically provide adequate mechanical protection.

Existing Routes With an Uncertain History

Older underground pathways may lack reliable drawings, inspection records or construction details. In addition, the condition of buried ducts may be difficult to confirm before installation.

Where uncertainty remains, CST armour can provide an additional protective layer. However, it should not become a substitute for route investigation.

Before hauling cable, the project team should inspect accessible pits, confirm pathway continuity and identify obstructions. Furthermore, the team should verify bend locations, duct condition and available pulling access.

When CST Armour May Not Be Necessary

CST armour is not automatically the best choice for every underground route.

A non-metallic or unarmoured cable may be more appropriate when:

  • A sound conduit system provides adequate mechanical protection.
  • The route has a low rodent and excavation risk.
  • The cable remains readily accessible and replaceable.
  • The project requires an entirely dielectric construction.
  • Electrical separation or bonding considerations discourage metallic components.
  • The installation involves aerial spans rather than underground pathways.
  • The specified cable already provides adequate protection for the assessed conditions.
  • The additional diameter, weight or stiffness would complicate installation.

For example, GRP armouring can provide non-metallic mechanical and rodent resistance where a dielectric construction is required. Our published comparison of GRP armoured and CST armoured fibre cable explains the important differences.

Therefore, choosing against CST armour does not necessarily mean accepting insufficient protection. Instead, it may reflect a different combination of pathway design, cable construction and electrical requirements.

Metallic Armour Requires Project-Level Consideration

Because CST uses steel, it introduces a metallic component into the cable construction. Designers must therefore consider the installation environment and applicable project requirements.

Depending on the network, relevant considerations may include:

  • Earthing and bonding requirements
  • Proximity to electrical infrastructure
  • Induced voltage risk
  • Lightning exposure
  • Cable entry arrangements
  • Metallic continuity
  • Site-specific electrical safety rules

These matters should be assessed by suitably qualified project personnel. In Australia, applicable customer-cabling work must also comply with relevant regulatory and installation requirements. The Australian Communications and Media Authority outlines the applicable cabling standards and regulations.

Where a completely dielectric cable is required, a non-metallic armoured construction may be more suitable.

CST Armour Cannot Correct a Poor Route

Specifying a mechanically strong cable does not remove the need for sound infrastructure design.

A CST cable can still fail if installers:

  • Exceed the maximum pulling tension
  • Violate the minimum bend radius
  • Pull the cable across sharp surfaces
  • Use unsuitable rollers or hauling equipment
  • Leave damaged jacket sections unrepaired
  • Allow water to enter joints or closures
  • Place the cable in unstable bedding
  • Fail to protect exposed transitions
  • Lose accurate route records

Our guide to why CST armoured underground fibre routes fail explains how these wider route problems can undermine an otherwise suitable cable.

Therefore, armour selection should support good engineering rather than attempt to replace it.

A Practical CST Armour Decision Process

Project teams can use the following process when deciding whether CST armour is required.

1. Define the route

Identify whether the cable will be installed in conduit, directly buried, placed through pits or transitioned between several pathway types.

2. Identify mechanical threats

Assess rodents, rocks, crushing loads, impacts, excavation activity, ground movement and repeated access.

3. Review pathway protection

Determine what protection the conduit, trench, bedding, covers, markers and physical barriers already provide.

4. Consider installation forces

Check the route length, bend locations, pulling access, hauling method and manufacturer’s tension limits.

5. Assess the consequences of failure

Consider restoration time, network redundancy, excavation costs and operational interruption.

6. Review metallic-component requirements

Confirm whether steel armour is acceptable near electrical infrastructure and whether specific bonding or earthing provisions apply.

7. Compare suitable cable constructions

Evaluate CST against GRP-armoured, standard outdoor, high-strength and other project-approved cable options.

8. Document the decision

Record why the selected construction matches the identified risks. As a result, future contractors and asset managers can understand the engineering basis for the specification.

Selecting C-Series CST Armoured Fibre Optic Cable

The RapidConnect C-Series is intended for heavy-duty underground fibre routes requiring steel-armoured mechanical protection.

Its corrugated steel tape forms a protective barrier around the loose tube cable core. Furthermore, the outer jacket protects the armour from the surrounding installation environment.

When selecting CST armour for underground fibre, project teams should also confirm:

  • Required fibre count
  • Singlemode fibre specification
  • Cable diameter
  • Cable mass
  • Maximum pulling tension
  • Minimum bend radius
  • Crush performance
  • Installation method
  • Drum length
  • Jointing and termination requirements

Anderson Corporation can assist consultants, contractors and asset owners in matching the RapidConnect C-Series CST Armoured Loose Tube Fibre Optic Cable to the route and project requirements.

Frequently Asked Questions

Does every underground fibre cable need CST armour?

No. The need for CST armour depends on the route’s mechanical risks, pathway protection, rodent exposure and consequences of failure. A well-protected, low-risk conduit route may not require steel armour.

Is CST armour suitable for direct burial?

CST armour can support a cable intended for demanding underground service. However, the complete cable must be approved for the proposed direct-burial application. Appropriate bedding, depth, route marking and installation practices also remain essential.

Does conduit remove the need for CST armour?

Not always. Damaged conduits, rodent-prone pits, repeated cable hauling and difficult replacement conditions can still justify CST armour inside a conduit system.

Is CST armour waterproof?

No. Corrugated steel tape provides mechanical protection rather than complete waterproofing. Water resistance depends on the cable’s water-blocking construction, outer jacket, joints, closures and entry seals.

Does CST armour make fibre cable rodent-proof?

CST armour provides a strong metallic barrier and improves rodent resistance. However, project documentation should avoid treating any cable as invulnerable under every condition.

Can CST cable be installed near electrical infrastructure?

Potentially, but its metallic armour requires project-specific assessment. Designers must consider separation, bonding, earthing, induced voltage and applicable electrical or telecommunications requirements.

What is the alternative when metallic armour is unsuitable?

A GRP-armoured fibre cable may provide a non-metallic alternative. However, its construction, mechanical performance and suitability should be checked against the specific route conditions.

Is stronger armour always the safest specification?

No. The safest specification is the construction that matches the complete installation environment. Cable weight, diameter, flexibility, electrical conditions and installation method must also be considered.

Protecting the Complete Underground Route

CST armour for underground fibre is most valuable where rodents, crushing, impact, civil activity or difficult replacement conditions create a meaningful mechanical risk.

However, steel armour remains only one part of the route protection system. Reliable underground infrastructure also depends on suitable pathways, controlled installation, effective water blocking, properly sealed joints and accurate asset records.

For additional product information and practical fibre guidance, visit the Anderson Corporation Fibre Optic Products YouTube channel.

For projects that require heavy-duty metallic protection, Anderson Corporation can help you assess fibre count, construction and installation requirements for the RapidConnect C-Series CST Armoured Loose Tube Fibre Optic Cable.